北京掌上天下_服务器维修_网络设备维修_数据恢复_企业IT外包_数据迁移_专业品牌维修服务商!
掌上天下欢迎您!

IBM x3650 M4服务器安装Red Hat Enterprise Linux问题

发布时间:2018-10-25 09:2 来源:掌上天下
摘要Red Hat Enterprise Linux 5 版本的驱动: ibm_dd_sraidmr_00.00.06.19_rhel5_32-64.tgz 下载地址 2.解压,并将文件拷贝到U盘。 3.插入U盘,使用光盘引导,在引导界面boot: 输入 linux dd 回车; boot: linux dd 4.安装过程中根据linux内核版本选择相应的ISO文件(在disks目录下)例如:64位的RedHat 5.5选择disks/dud-2.6.18-194-64.RHEL5.iso 5.安装程序应该正确识别磁盘,进行系统安装。

IBM x3650 M4服务器安装Red Hat Enterprise Linux问题


问题1:由于驱动问题,安装程序无法找磁盘

下载Raid驱动。

Red Hat Enterprise Linux 5 版本的驱动:

ibm_dd_sraidmr_00.00.06.19_rhel5_32-64.tgz

2.解压,并将文件拷贝到U盘。

3.插入U盘,使用光盘引导,在引导界面boot: 输入 linux dd 回车;
boot: linux dd
4.安装过程中根据linux内核版本选择相应的ISO文件(在disks目录下)例如:64位的RedHat 5.5选择disks/dud-2.6.18-194-64.RHEL5.iso


5.安装程序应该正确识别磁盘,进行系统安装。

问题2:lspci显示设备为Unknown device

如下所示:


# lspci
00:00.0 Host bridge: Intel Corporation Unknown device 3c00 (rev 07)
00:01.0 PCI bridge: Intel Corporation Unknown device 3c02 (rev 07)
00:04.0 System peripheral: Intel Corporation Unknown device 3c20 (rev 07)
00:04.1 System peripheral: Intel Corporation Unknown device 3c21 (rev 07)
......
80:05.2 System peripheral: Intel Corporation Unknown device 3c2a (rev 07)

解决方法:

更新pci-ids文件:从pciids.sourceforge.net下载,并上传到服务器/root/目录下

备份原来的pci.ids文件:

[root@localhost ~]#cd /usr/share/hwdata/
[root@localhost hwdata]#mv pci.ids pci.ids_BAK_20130812
[root@localhost hwdata]#mv /root/pci.ids /usr/share/hwdata/
[root@localhost hwdata]# lspci|more
00:00.0 Host bridge: Intel Corporation Xeon E5/Core i7 DMI2 (rev 07)
00:01.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 1a (rev 07)
00:02.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 2a (rev 07)
00:02.2 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 2c (rev 07)
00:03.0 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 3a in PCI Express Mode (rev 07)
00:03.2 PCI bridge: Intel Corporation Xeon E5/Core i7 IIO PCI Express Root Port 3c (rev 07)
00:04.0 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 0 (rev 07)
00:04.1 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 1 (rev 07)
00:04.2 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 2 (rev 07)
00:04.3 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 3 (rev 07)
00:04.4 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 4 (rev 07)
00:04.5 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 5 (rev 07)
00:04.6 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 6 (rev 07)
00:04.7 System peripheral: Intel Corporation Xeon E5/Core i7 DMA Channel 7 (rev 07)
00:05.0 System peripheral: Intel Corporation Xeon E5/Core i7 Address Map, VTd_Misc, System Management (rev 07)
00:05.2 System peripheral: Intel Corporation Xeon E5/Core i7 Control Status and Global Errors (rev 07)
00:11.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Virtual Root Port (rev 06)
00:1a.0 USB controller: Intel Corporation C600/X79 series chipset USB2 Enhanced Host Controller #2 (rev 06)
00:1c.0 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Root Port 1 (rev b6)
00:1c.7 PCI bridge: Intel Corporation C600/X79 series chipset PCI Express Root Port 8 (rev b6)
已经可以正常识别所有PCI设备。

问题3:双网卡绑定无法正常工作,系统无法正常识别断开的链路
由于intel网卡驱动问题,需要更新网卡驱动:1,下载网卡驱动:根据型号从Intel官网下载,82575/6, 82580, I350, I210等型号的网卡可以点击这里下载。
2,上传并解压:igb-4.3.0.tar.gz


[root@localhost ~]# tar -zxvf igb-4.3.0.tar.gz
igb-4.3.0/
igb-4.3.0/igb.spec
igb-4.3.0/igb.7
igb-4.3.0/pci.updates
igb-4.3.0/SUMS
igb-4.3.0/src/
igb-4.3.0/src/e1000_api.h
igb-4.3.0/src/e1000_nvm.h
igb-4.3.0/src/e1000_manage.c
igb-4.3.0/src/igb_vmdq.h
igb-4.3.0/src/igb_procfs.c
igb-4.3.0/src/e1000_i210.c
igb-4.3.0/src/e1000_phy.c
igb-4.3.0/src/kcompat.c
igb-4.3.0/src/igb.h
igb-4.3.0/src/igb_hwmon.c
igb-4.3.0/src/e1000_82575.h
igb-4.3.0/src/e1000_nvm.c
igb-4.3.0/src/e1000_defines.h
igb-4.3.0/src/e1000_82575.c
igb-4.3.0/src/e1000_phy.h
igb-4.3.0/src/kcompat.h
igb-4.3.0/src/e1000_mac.c
igb-4.3.0/src/Module.supported
igb-4.3.0/src/e1000_mbx.h
igb-4.3.0/src/e1000_mac.h
igb-4.3.0/src/igb_ptp.c
igb-4.3.0/src/e1000_i210.h
igb-4.3.0/src/igb_regtest.h
igb-4.3.0/src/e1000_api.c
igb-4.3.0/src/e1000_mbx.c
igb-4.3.0/src/e1000_osdep.h
igb-4.3.0/src/igb_ethtool.c
igb-4.3.0/src/igb_vmdq.c
igb-4.3.0/src/e1000_hw.h
igb-4.3.0/src/e1000_regs.h
igb-4.3.0/src/igb_param.c
igb-4.3.0/src/e1000_manage.h
igb-4.3.0/src/igb_main.c
igb-4.3.0/src/kcompat_ethtool.c
igb-4.3.0/src/Makefile
igb-4.3.0/COPYING
igb-4.3.0/README
[root@localhost ~]# cd igb-4.3.0
[root@localhost igb-4.3.0]# cd src/
3,进行安装:


[root@localhost src]# make install
make -C /lib/modules/2.6.18-194.el5/build SUBDIRS=/root/igb-4.3.0/src modules
make[1]: Entering directory `/usr/src/kernels/2.6.18-194.el5-x86_64'
  CC [M]  /root/igb-4.3.0/src/igb_main.o
  CC [M]  /root/igb-4.3.0/src/e1000_82575.o
  CC [M]  /root/igb-4.3.0/src/e1000_i210.o
  CC [M]  /root/igb-4.3.0/src/e1000_mac.o
  CC [M]  /root/igb-4.3.0/src/e1000_nvm.o
  CC [M]  /root/igb-4.3.0/src/e1000_phy.o
  CC [M]  /root/igb-4.3.0/src/e1000_manage.o
  CC [M]  /root/igb-4.3.0/src/igb_param.o
  CC [M]  /root/igb-4.3.0/src/igb_ethtool.o
  CC [M]  /root/igb-4.3.0/src/kcompat.o
  CC [M]  /root/igb-4.3.0/src/e1000_api.o
  CC [M]  /root/igb-4.3.0/src/e1000_mbx.o
  CC [M]  /root/igb-4.3.0/src/igb_vmdq.o
  CC [M]  /root/igb-4.3.0/src/igb_procfs.o
  CC [M]  /root/igb-4.3.0/src/igb_hwmon.o
  LD [M]  /root/igb-4.3.0/src/igb.o
  Building modules, stage 2.
  MODPOST
  CC  /root/igb-4.3.0/src/igb.mod.o
  LD [M]  /root/igb-4.3.0/src/igb.ko
make[1]: Leaving directory `/usr/src/kernels/2.6.18-194.el5-x86_64'
gzip -c ../igb.7 > igb.7.gz
# remove all old versions of the driver
find /lib/modules/2.6.18-194.el5 -name igb.ko -exec rm -f {} \; || true
find /lib/modules/2.6.18-194.el5 -name igb.ko.gz -exec rm -f {} \; || true
install -D -m 644 igb.ko /lib/modules/2.6.18-194.el5/kernel/drivers/net/igb/igb.ko
/sbin/depmod -a || true
install -D -m 644 igb.7.gz /usr/share/man/man7/igb.7.gz
man -c -P'cat > /dev/null' igb || true
4,删除旧的驱动,加载新驱动(网络可能会中断几十秒),最好是在本地操作,远程操作可以使用如下的方法。
[root@localhost src]# rmmod igb; modprobe igb
5,查看新驱动的相关信息:


[root@localhost src]# lsmod |grep igb
igb   205672  0
i2c_algo_bit   42185  1 igb
i2c_core   56641  3 igb,i2c_algo_bit,i2c_ec
8021q  57425  2 igb,cxgb3
dca41221  1 igb
[root@localhost src]# modinfo igb
filename:   /lib/modules/2.6.18-194.el5/kernel/drivers/net/igb/igb.ko
version:4.3.0
license:GPL
description:Intel(R) Gigabit Ethernet Network Driver
author: Intel Corporation, <e1000-devel@lists.sourceforge.net>
srcversion: 91C113BAC8EE9277766AEAD
alias:  pci:v00008086d000010D6sv*sd*bc*sc*i*
alias:  pci:v00008086d000010A9sv*sd*bc*sc*i*
alias:  pci:v00008086d000010A7sv*sd*bc*sc*i*
alias:  pci:v00008086d000010E8sv*sd*bc*sc*i*
alias:  pci:v00008086d00001526sv*sd*bc*sc*i*
alias:  pci:v00008086d0000150Dsv*sd*bc*sc*i*
alias:  pci:v00008086d000010E7sv*sd*bc*sc*i*
alias:  pci:v00008086d000010E6sv*sd*bc*sc*i*
alias:  pci:v00008086d00001518sv*sd*bc*sc*i*
alias:  pci:v00008086d0000150Asv*sd*bc*sc*i*
alias:  pci:v00008086d000010C9sv*sd*bc*sc*i*
alias:  pci:v00008086d00000440sv*sd*bc*sc*i*
alias:  pci:v00008086d0000043Csv*sd*bc*sc*i*
alias:  pci:v00008086d0000043Asv*sd*bc*sc*i*
alias:  pci:v00008086d00000438sv*sd*bc*sc*i*
alias:  pci:v00008086d00001516sv*sd*bc*sc*i*
alias:  pci:v00008086d00001511sv*sd*bc*sc*i*
alias:  pci:v00008086d00001510sv*sd*bc*sc*i*
alias:  pci:v00008086d00001527sv*sd*bc*sc*i*
alias:  pci:v00008086d0000150Fsv*sd*bc*sc*i*
alias:  pci:v00008086d0000150Esv*sd*bc*sc*i*
alias:  pci:v00008086d00001524sv*sd*bc*sc*i*
alias:  pci:v00008086d00001523sv*sd*bc*sc*i*
alias:  pci:v00008086d00001522sv*sd*bc*sc*i*
alias:  pci:v00008086d00001521sv*sd*bc*sc*i*
alias:  pci:v00008086d00001539sv*sd*bc*sc*i*
alias:  pci:v00008086d0000157Csv*sd*bc*sc*i*
alias:  pci:v00008086d0000157Bsv*sd*bc*sc*i*
alias:  pci:v00008086d00001538sv*sd*bc*sc*i*
alias:  pci:v00008086d00001537sv*sd*bc*sc*i*
alias:  pci:v00008086d00001536sv*sd*bc*sc*i*
alias:  pci:v00008086d00001533sv*sd*bc*sc*i*
depends:i2c-core,dca,i2c-algo-bit,8021q
vermagic:   2.6.18-194.el5 SMP mod_unload gcc-4.1
parm:   InterruptThrottleRate:Maximum interrupts per second, per vector, (max 100000), default 3=adaptive (array of int)
parm:   IntMode:Change Interrupt Mode (0=Legacy, 1=MSI, 2=MSI-X), default 2 (array of int)
parm:   Node:set the starting node to allocate memory on, default -1 (array of int)
parm:   LLIPort:Low Latency Interrupt TCP Port (0-65535), default 0=off (array of int)
parm:   LLIPush:Low Latency Interrupt on TCP Push flag (0,1), default 0=off (array of int)
parm:   LLISize:Low Latency Interrupt on Packet Size (0-1500), default 0=off (array of int)
parm:   RSS:Number of Receive-Side Scaling Descriptor Queues (0-8), default 1, 0=number of cpus (array of int)
parm:   VMDQ:Number of Virtual Machine Device Queues: 0-1 = disable, 2-8 enable, default 0 (array of int)
parm:   max_vfs:Number of Virtual Functions: 0 = disable, 1-7 enable, default 0 (array of int)
parm:   MDD:Malicious Driver Detection (0/1), default 1 = enabled. Only available when max_vfs is greater than 0 (array of int)
parm:   QueuePairs:Enable Tx/Rx queue pairs for interrupt handling (0,1), default 1=on (array of int)
parm:   EEE:Enable/disable on parts that support the feature (array of int)
parm:   DMAC:Disable or set latency for DMA Coalescing ((0=off, 1000-10000(msec), 250, 500 (usec)) (array of int)
parm:   LRO:Large Receive Offload (0,1), default 0=off (array of int)
parm:   debug:Debug level (0=none, ..., 16=all) (int)


128彩票App下载|128彩票开奖|128福彩官网 时时彩1999倍率盘|时时彩最高倍率网站 E乐彩会员线路 www.elecai3.com 凤凰体彩App|凤凰体彩娱乐-官方直营 高频彩App下载|高频彩票软件下载 时时彩1999倍率盘|时时彩最高倍率网站 128福彩App下载-官方直营 E乐彩会员线路 www.elecai3.com 时时彩1999倍率盘|时时彩最高倍率网站 凤凰体彩娱乐|凤凰体彩App-官方直营